In need of a hardware piece.

General questions regarding Linux.

Moderators: Terry, FWLUG Administrator

In need of a hardware piece.

Postby stack » Sat Jan 26, 2008 8:44 pm

So I was attempting a processor upgrade and dropped a piece of the fan casing off the table...and it busted! Dah...
Anyway, I can't seem to find anyone that sells just this piece so before I buy a new heatsink/fan I figured I would ask here.
If you look at the picture ( http://www.intel.com/support/processors/pentium4/Img/figure14.jpg ) its the D (Clip Frame Corners) piece that is also shown alone with the B and E diagram. Does anyone have a spare piece to give or sell?
User avatar
stack
 
Posts: 268
Joined: Sat Jul 14, 2007 2:11 pm
Location: Fort Worth, Texas

Re: In need of a hardware piece.

Postby stack » Sat Jan 26, 2008 9:51 pm

bah...Nevermind...
My "I can fix this!" attitude x natural ability to roll ones on anything that requires craftmanship = I f'd it up good....

Thankfully I have an account at Newegg.com :-D
User avatar
stack
 
Posts: 268
Joined: Sat Jul 14, 2007 2:11 pm
Location: Fort Worth, Texas

Junkman to the rescue!!!

Postby Davemon » Sun Jan 27, 2008 1:19 am

I have that!




Davemon
User avatar
Davemon
 
Posts: 247
Joined: Sat Feb 10, 2007 2:42 pm

Re: In need of a hardware piece.

Postby glevans2 » Mon Jan 28, 2008 12:27 pm

I have had to replace that piece before. I bought a replacement from Electronic Discount Sales http://www.electronicdiscountsales.com/. I went in and bought one for less than 5 dollars, but I
don't remember the exact cost.

-WARNING!!!!!!-

If you can't walk into a surplus store and walk out again with only the intended part purchased,
this store can be dangerous to your pocketbook, the amount of free space you have available,
and your relationship with significant other if they haven't been bitten by the computer (or junk)
bug.
Garen L. Evans, II
++It is pitch black. You are likely to be eaten by a grue.++
User avatar
glevans2
 
Posts: 63
Joined: Mon Mar 05, 2007 1:35 pm
Location: Fort Worth

Re: In need of a hardware piece.

Postby stack » Tue Jan 29, 2008 3:24 pm

Thanks! I will check it out!
User avatar
stack
 
Posts: 268
Joined: Sat Jul 14, 2007 2:11 pm
Location: Fort Worth, Texas


Return to FWLUG General Discussions

Who is online

Users browsing this forum: No registered users and 10 guests

cron